GLP JDC Burst 1 builds the grid for Swedish House Mafia’s biggest ever show at Ullevi
Lighting designer Pierre Claude chose the strobes to draw grid patterns across a 360-degree stadium design, programmed the entire show in pre-visualisation with 15 minutes on the real rig, and came through a thunderstorm that cancelled the previous night without swapping a single GLP fixture
When Swedish House Mafia played Gothenburg’s Ullevi this August, in what the stadium describes as the biggest show of the trio’s career, the rig carried almost 500 GLP JDC Burst 1. Lighting designer Pierre Claude specified them for a set design already fixed as a 360-degree arrangement built around towers, needing enough fixtures to draw geometric grids across the whole venue rather than to light a stage from one end of it. That meant a need for two things. The output had to register across a bowl holding 70,000 people with no conventional stage to anchor sightlines, and the sealed IP65 construction was to meet a test considerably harder than the one it was designed for.
“I was called months ago. The set design was done already, so I knew it was mostly a lot of towers. When I saw those towers, it was obvious to put lots of lights on each,” says Pierre Claude, lighting designer. “For a stadium show, with the number of fixtures I can use properly, it makes sense to use strobes. I asked the local vendor to bring a lot of JDCs, and they said they have JDC Bursts. So I asked, are you able to bring like 500 fixtures? And they said yes.”
“The concept of the JDC Burst 1, and why we chose them, is that we like to create grids and different forms in general,” says Krister Hedgren, lighting technical director. “It’s not a classic arena production in the sense that we have one stage at one end. It’s a 360 stage design. We have fixtures everywhere in the venue, and the JDC Bursts have worked beautifully in this setup. They were easy fixtures to install, and the software is very good and stable too.”
Claude, who is based in Paris and has been designing for 20 years, approaches electronic music on a principle that shaped how the fixtures were used.
“The most important thing is not how it looks. It’s the dynamics of the show,” says Claude. “I want them to hit all the hits, not to have a properly nice look, because EDM and electronic music is a lot of hits and it’s very punchy, very fast. Nice looks work for pop music or rock shows because you can enjoy a look for a verse or a chorus. But in EDM, it’s too quick to remember a look. You just remember the dynamic.”
That focus on rhythm rather than composition became more significant than intended, because Claude never got the rehearsal time to work with the physical rig. Creative direction arrived late, which pushed the entire programme into pre-visualisation and left him with a very small amount of time on the real fixtures before the show.
“We didn’t have any time to rehearse with the proper rig. It was all in pre-vis, because the creative direction was late with their ideas, so I spent most of the time in the pre-vis,” says Claude. “I just had 15 minutes to check the presets, the colour calibration and the shutter frequencies, and no more. And actually, all the JDC Burst fixtures were looking the same in the pre-vis as in real life. The JDC is so easy to program. It’s straight to the goal. It’s a strobe, so I just want a dimmer, colours and shutter. Nothing else.”
Then the weather intervened. Two sold-out Ullevi shows had been scheduled for the weekend of 28 and 29 August. On that Friday, with the audience in the stadium and the rig up and powered, a severe thunderstorm moved north over Gothenburg. Sweden’s meteorological institute issued a yellow warning for heavy rain and strong gusts. The show was paused, Ullevi was evacuated and the performance was cancelled before the band reached the stage.
The rig spent that evening exposed to torrential rain and lightning. When the production came to check it over the following day, three fixtures across the entire lighting system needed replacing. None of them was a GLP unit.
On a 360-degree design, that reliability carries further than a fixture count suggests, because there is no back of house to hide a failure in and no time to reach a unit once doors are open.
“When you do a 360 show, as a lighting director or technical director, it’s important that everything is show ready as soon as people are walking in,” says Hedgren. “Due to the fact that there was heavy rain the day before, things can happen. Water can gather or leak into connectors. So, it’s really important to have a look and make sure we’re show ready as much as possible.”
Hedgren puts the same two qualities in the terms that mattered on the night.
“Brightness is very important. This is a big venue in terms of size. We had 70,000 people there. And we didn’t have a classic stage design, so brightness was key in terms of output,” says Hedgren. “The IP65 rating also proved to be a real success, given that we had a thunderstorm the day before. I don’t know how much rain we had, but it was a ridiculous amount. The fixture is really, really reliable in terms of that IP rating.”
The single Swedish House Mafia show in Gothenburg went ahead as planned and stands as the group’s largest to date. Axwell, Steve Angello and Sebastian Ingrosso return to Ullevi in July 2027 for four nights, their only European performances of that year, with a show built specifically around the stadium.