JDC1 V1.98

MAIN CHANGES FROM V1.95 TO V1.98

‍BUG FIXES 

‍Solved: Fixtures loosing tilt position. The problem occures during very very very slow movements, only

‍UPDATE PROCESS

1 file has to be updated via DMX/RS485:

JDC-1 Main DMX V198.bin (via D2PROG or D3PROG)

When importing the bin file to a DProg make sure that you choose the file type BIN before uploading the file to the programmer.

Fixtures can be updated daisy chain via DMX. Please make sure that no other DMX receivers or consoles are active on the line

‍INFO

‍Update is not show critical

‍VERSION DETAILS

Update: JDC-1 Main DMX V198.bin

‍DOWNLOAD

GLP JDC1 Firmware V1-98 Rev20230417-1 

impression FR10 Bar V63

Main changes from V60 to V63

‍BUG FIXES 

‍Solved: Critcal Bug which could damage a tilt driver resistor (R118) .

If this happens tilt stops working.

‍UPDATE PROCESS

To prepare fixtures below version 60 for this update, a bootloader updated has to be installed in advance before updating the main firmware V63. Both updates can be done via DMX (daisy chain), one after the other.

Update with D3Prog, only, Version 42 or higher / PC software Version

605 or higher, daisy chain via RS485/DMX

‍VERSION DETAILS

Update: FR_10_DMX_V63.bin , FR_10_Main_Up_Bl_V6.bin

‍DOWNLOAD

GLP impression FR10 Bar Firmware V63 Rev20230412-1 (  zip | 262.92 KB)

Fusion Stick FS16Z V1011

Main changes from V1009 to V1011

IMPROVEMENTS

‍Added RDM Factory Defaults

‍UPDATE PROCESS

Update via Fusion Stick PC Update Software V103 via USB to XLR Connector item code 4930108: ”Firmware Updater for Fusion FS10/ FS20/ FP7/FS16Z”

Please make sure that no other DMX receivers or consoles are active on the line and fixtures Control Protocol is set to DMX.

All fixture settings will be reset to factory defaults after the main application update.

‍INFO

‍Update is not show critical

‍VERSION DETAILS

Update: STICK_FS_16Z_XLR_V1011.FSN

‍DOWNLOAD

FUSION Stick FS16Z Firmware V1011 Rev20230413-1 ( zip | 464.18 KB)

Fusion X-PAR 12Z V1.0.10

Main changes from V1.0.02 to V1.0.10

FEATURES

‍improved dimmer curves

improved color wheel

added dimmer snap function

optimized manual control (e.g. removed 16 bit channels etc)

Improved RDM ( included Factory Backup)

Caution: Factory Backup will restore all settings to default including DMX-Address and DMX-Mode!

Rearranged the display menus as to the latest specifications

Renamed some display entrys as to the latest specifications

DMX Hold is the default setting for No DMX

BUG FIXES

‍RDM Discovery was sometimes not working via MA2

‍UPDATE PROCESS

Update via Fusion PC Software with USB to XLR Adapter or update with Fusion Upater

(for ExoSeries and XParSeries)

‍INFO

As dimming curves changed and bug in color wheel is fixed the fixtures will not be show compatible

Added RDM Factory backup! One click can change Start Address and DMX Mode!

‍VERSION DETAILS

Update: XP12_MAIN_1_V01.GFS

‍DOWNLOAD

FUSION X-PAR 12Z Firmware V1-0-10 Rev20230508-1 (zip | 157.58 KB)

This Newsletter was sent on Dimanche, 24 Novembre 2024 13:52 ‍ by ‍GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

‍No longer want to receive our news? - Unsubscribe ‍