GLP JDC Line 500/1000 - Software Update V0.72

CHANGES

Added support for new FLASH IC

Changed ArtNet port settings

UPDATE PROCESS

One file has to be uploaded via DMX/RS485:

1. Upload:  JDC-Line_0.7.2_DMX.bin

The fixtures must be updated via D3Prog daisy chain via DMX/RS485.Please make sure that no other DMX receivers or consoles are active on the line and fixtures Control Protocol is set to DMX.

‍INFO

Please make sure that your D3Prog is at least on V42 and your transfer software programmer app on version 612 or higher.

This update is show critical as dimmer curve, color calibration shutter rate and duration channels are affected.

‍DOWNLOAD

GLP JDCLine 500 1000 Firmware V0-7-2 Rev20230316-1 (zip | 396.73 KB)

GLP IMPRESSION FR10 BAR - Software Update V62

‍BUG FIXES 

Solved: Fixtures loosing tilt and zoom position. 

The problem occures during very very slow movements only, but position can shift then extremly!

‍UPDATE PROCESS

Update with D3Prog, only, Version 42 or higher / PC software Version

605 or higher, daisy chain via RS485/DMX

‍INFO

Updating is show sensitiv as zoom and tilt speed was affected by the bug!

To prepare fixtures below version 60,  a Bootloader update has to be installed before updating the main firmware V62.

Both updates can be done via DMX (daisy chain), one after the other.

‍DOWNLOAD

GLP impression FR10 Bar Firmware V62 Rev20230314-1 (zip | 260.78 KB)

This Newsletter was sent on Thursday, 26 December 2024 19:05 ‍ by ‍GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

‍No longer want to receive our news? - Unsubscribe ‍